DODGE Nitro KA 2007-2011 fluids type and filling capacities

Recommended engine oil, transmission fluids, coolant type, filling capacities and service intervals for DODGE Nitro KA 2007-2011.
Agregate | Recomeded fluid | Capacity (L) | Intervals |
2,8L diesel engine (VM RA428) | 0W40 (MB229.31 or MB229.51 or MS-10725, ACEA C3) - without DPF; 5W30 (MB229.31 or MB229.51 or MS-11106, ACEA C3) - with DPF |
6,6 (7 qt) | 10000 km (6000 miles) or 6 months, whichever occurs first |
3,7L gasoline engine (PowerTech) | 5W20 or 5W30 (MS-6395 or MB229.31 or MB229.51) | 4,7 (5 qt) | 50000 km (3000 miles) or 3 months, whichever occurs first |
4,0L gasoline engine | 10W-30 (MS-6395) | 5,2 | 50000 km (3000 miles) or 3 months, whichever occurs first |
4-speed automatic transmission (42RE) | MOPAR ATF+4 | 8,3 (overhaul fill); 3,8 (service fill) |
100000 km (60000 miles) or 60 months, whichever occurs first |
5-speed automatic transmission (NAG1) | MOPAR ATF+4 | 7,7 (overhaul fill); 5 (service fill) |
100000 km (60000 miles) or 60 months, whichever occurs first |
Manual transmission (NSG370) | MOPAR Manual Transmission Lubricant (MS-9224) | 1,6 | 50000 km (30000 miles) or 30 months, whichever occurs first |
Transfer case (MP1522 and MP3022) | MOPAR ATF+4 | 1,9 | 100000 km (60000 miles) or 60 months, whichever occurs first |
Front axle (186 FIA) | 80W-90 GL-5 | 1,3 | 24000 km (15000 miles) |
Rear axle (8-1/4) | 75W-140 GL-5 | 2,1 | 24000 km (15000 miles) |
Cooling System (2,8L diesel engine, VM RA428) | MOPAR Antifreeze 5 years/100,000 Mile Formula (MS-9769) | 11,1 | 160000 km (100000 miles) or 5 years, whichever comes first |
Cooling System (3,7L gasoline engine, PowerTech) | MOPAR Antifreeze 5 years/100,000 Mile Formula (MS-9769) | 13,2 (14 qt) | 160000 km (100000 miles) or 5 years, whichever comes first |
Brake and clutch system | DOT3 or DOT4 (J1703) | ||
Power steering | MOPAR ATF+4 or MOPAR PSF+4 | ar required | |
Hinges (door and hood swing gate hinges) | Mopar Engine Oil or Mopar Multi-Purpose Lube NLGI Grade 2 EP, GC-LB | ||
Lock Cylinders | Mopar Lock Cylinder Lube | ||
Steering gear and linkage, ball joints, prop shafts and yokes, wheel bearings, latches (door, hood/safety catch, swing gate), seat regulator and seat track | Mopar Multi-Purpose Lubricant NLGI Grade 2 EP, GC-LB |
Information of this table may be incorect for your region or driving conditions. Refer to the owners/service manual for details.
If this website is helpful, you can rate and share it: